Kia Carens: Brake system / Hill-start assist control (HAC)

Kia Carens RP (2013-2018) Owners Manual / Driving your vehicle / Brake system / Hill-start assist control (HAC)

A vehicle has the tendency to slip back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from slipping back by operating the brakes automatically for about 1~2 seconds. The brakes are released when the accelerator pedal is depressed or after about 1~2 seconds.

WARNING

The HAC is activated only for about 1~2 seconds, so when the vehicle is starting off always depress the accelerator pedal.

✽ NOTICE

The HAC does not operate when the transaxle shift lever is in the P (Park) or N (Neutral) position.
The HAC activates even though the ESC is off but it does not activate when the ESC has malfunctioned.

Vehicle stability management (VSM)

This system provides further enhancements to vehicle stability and steering responses when a vehicle is driving on a slippery road or a vehicle detected changes in coefficient of friction between ri ...

Emergency Stop Signal (ESS)

The Emergency Stop Signal system alerts the driver behind by blinking the stop light when the vehicle is braked rapidly and severely. The system is activated when: The vehicle suddenly stops (vehic ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Warning type

If an approaching vehicle detected by sensors, the warning is chime and the warning light will blink on the outside rearview mirror. The system will notify the driver through LCD. If the detected vehicle is out of detection range, moving away in the opposite direction or moving slow, the w ...

Kia Carens RP (2013-2018) Service Manual: Rail Pressure Sensor (RPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Condition Output Voltage (V) ...