Kia Carens: Steering wheel / Heated Steering wheel Repair procedures

Kia Carens RP (2013-2018) Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Inspection

Measure a resistance of NTC and Heated pad.

–	NTC resistance(Red / Black) - 10kΩ (±10%, 25°C)

–	Heated pad resistance (Yellow, Black) - 2.1 ~ 2.5Ω

Measure a temperature.

–	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

–	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

–	At that time switch on, all measure point (1~8)

Heated Steering wheel Schematic diagrams

System Circuit Diagram ...

Flex Steer Components and components location

Components Location 1. Flex steering swithch ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Auto Light Sensor Repair procedures

Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply an ...

Kia Carens RP (2013-2018) Service Manual: Cylinder Block Components and components location

Components 1. Cylinder block 2. Ladder frame 3. Crank shaft 4. Crank shaft upper bearing 5. Crank shaft lower bearing 6. Thrust bearing 7. Main bearing cap 8. Crank shaft sproket ...