Kia Carens: Front light replacement / Headlight (Low, High Non-HID Type)
.png)
Follow the steps 1 to 2 from the previous chapter.
3. Remove the headlight bulb cover by turning it counterclockwise.
4. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
5. Pull the bulb out of the socket.
6. Insert a new bulb into the socket.
7. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
8. Install the headlight bulb cover by turning it clockwise.
9. Connect the power connector to the back of the headlight assembly.
✽ NOTICE
If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, we recommend that you consult an authorized Kia dealer.
Static bending light
Follow the steps 1 to 2 from the previous chapter.
3. Remove the headlight bulb cover by turning it counterclockwise.
4. Disconnect the headlight bulb socket-connector.
5. Unsnap the headlight bulb r ...
Headlight (Low, HID type), Position light/DRL (LED type)
If the light does not operate, we recommend that the system be checked by an
authorized Kia dealer.
WARNING - HID Headlight low beam (if equipped)
Do not attempt to replace or inspect the low beam (X ...
Other information:
Kia Carens RP (2013-2018) Service Manual: Smart Key Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. 2. Select the vehicle model and then do "Smart key c ...
Kia Carens RP (2013-2018) Owners Manual: Temperature control
The temperature will increase to the maximum (HI) by turning the knob to the right extremely. The temperature will decrease to the minimum (Lo) by turning the knob to the left extremely. When turning the knob, the temperature will increase or decrease by 0.5°C/1°F. When set to the lowest tempe ...
