Kia Carens: Body Side Moulding / Front Wheel Guard Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Remove the front tire.
2.
Remove the front mud guard.
(Refer to Body Side Moulding - "Front Mud Guard")
3.
After loosening the mounting clips, screws, nut, then remove the front wheel guard (A).

4.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Spoiler Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Rear Wheel Guard Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures


Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...

Kia Carens RP (2013-2018) Service Manual: Dynamic Damper Repair procedures


Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ joint”) 3. Rem ...

Copyright © www.kicaman.com 2015-2024