Other information:
Inspection
Radiator Cap Testing
1.
Remove the radiator cap, wet its seal with engine coolant, and then
install it on a pressure tester.
2.
Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm², 13.51
~ 17.78 ...
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It remains on until the engine is started.
When the engine oil pressure is low.
If the engine oil pressure is low:
1.Drive carefully to the nearest safe location and stop your veh ...