Kia Carens: Cylinder Block / Drive Plate Repair procedures

Kia Carens RP (2013-2018) Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Repair procedures

Removal and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate(A).
Tightening torque :
71.5 ~ 75.5N.m (7.3 ~ 7.7kgf.m, 52.8 ~ 55.6 lb-ft)

3.
Install in the reverse order of removal.
Drive Plate Components and components location
Components 1. Adapter plate 2. Drive plate ...

Flywheel Components and components location
Components 1. Fly Wheel ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Blower Motor Repair procedures


Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. 3. ...

Kia Carens RP (2013-2018) Service Manual: Heater & A/C Control Unit (DATC) Repair procedures


Self Diagnosis 1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel blinks three times every 0.5 second, the corresponding fault code blinks on the setup temperature display panel e ...

Copyright © www.kicaman.com 2015-2026