Kia Carens: BSD (Blind Spot Detection) / LCA (Lane Change Assist) / Detecting sensor
.png)
The sensors are located inside the rear bumper.
Always keep the rear bumper clean for the system to work properly.
The system will activate when:
1.The system is on
2.Vehicle speed is above 30 km/h (18.6 mph)
3.Other vehicles are detected in the rear side
WARNING
The Blind Spot Detection System (BSD) is not a subs ...
The message will appear to notify the driver if there are foreign substances
on the surface or inside the rear bumper or it is hot near the rear bumper. The
light on the switch and the system will ...
Other information:
System voltage: DC 12 V
Working voltage: DC 10 - 15 V
Amperage rating: max. 15 A
Suitable for use at temperatures: -30 ~ +70°C (-22 ~ +158°F)
Max. working pressure: 6 bar (87 psi)
Size
Compressor: 170 x 150 x 60 mm (6.7 x 5.9 x 2.4 in.)
Sealant bottle: 85 x 77 ø mm (3.3 x 3.0 ø in.)
Compressor w ...
Troubleshooting
Customer Complaint Analysis
Check Sheet
There are six areas where a problem can occur: wiring harness, the radio, the
CD player, and speaker. Troubleshooting enables you to confine the problem to
a particular area.
Chart 1
...