Kia Carens: Exterior care / Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
- Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes
on aluminum wheels. They may scratch or damage the finish.
- Clean the wheel when it has cooled.
- Use only a mild soap or neutral detergent, and rinse thoroughly with water.
Also, be sure to clean the wheels after driving on salted roads. This helps
prevent corrosion.
- Avoid washing the wheels with high-speed car wash brushes.
- Do not use any alkaline or acid detergent. It may damage and corrode the
aluminum wheels coated with a clear protective finish.
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the label.
Finish mainte ...
Protecting your vehicle from corrosion
By using the most advanced design and construction practices to combat corrosion,
we produce cars of the highest quality. However, this is only part of the job. ...
Other information:
To stop the engine in idle stop mode
With manual transaxle
1. Decrease the vehicle speed to less than 5 km/h (3 mph).
2. Shift into N (Neutral) position.
3. Release the clutch pedal.
With dual clutch transmission
1. Decrease the vehicle speed to 0 km/h.
2. Shift into D (Drive) or N (Neutral) positi ...
Components Location
1. Automatic
transaxle
2. Inhibitor switch
3. Engine Control Module(ECM)
4. Valve body cover
5. Solenoid valve connect
6. Oil temperature sensor
7. Valve body assembly
8. Line Pressure Control Solenoid Valve
9. SS-A ...