Kia Carens: Anti-theft System / UIP(Ultrasonic Intrusion Protection) Sensor Specifications

Kia Carens RP (2013-2018) Service Manual / Body Electrical System / Anti-theft System / UIP(Ultrasonic Intrusion Protection) Sensor Specifications

Specifications

UIP sensor

Item		Specification
Normal operating voltage		DC 12V
Operating voltage range		DC 9V ~ 16V
Operating temperature		-40°C (-40°F) ~ 85°C (185°F)
Dark current	Disarm mode	Max. 0.5mA (at DC 12V)
	Arm mode	Max. 3.0mA (at DC 12V)
Current consumption	Alarm mode	Max. 4.5mA (at DC 12V)

※ UIP sensor is installed in the overhead console lamp.

Siren & ACU(Alarm Control Unit) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the left luggage side trim. (Refer to Body - "Interior ...

UIP(Ultrasonic Intrusion Protection) Sensor Components and components location

Component Location ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Injector Troubleshooting

Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from th ...

Kia Carens RP (2013-2018) Service Manual: Coolant Repair procedures

Replacement And Air Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. ...