Kia Carens: Tire Pressure Monitoring System (TPMS) / TPMS (Tire Pressure Monitoring System) malfunction indicator
The low tire pressure telltale will illuminate after it blinks for approximately
one minute when there is a problem with the Tire Pressure Monitoring System. If
the system is able to correctly detect an underinflation warning at the same time
as system failure then it will illuminate both the TPMS malfunction and low tire
pressure telltales e.g. if Front Left sensor fails, the TPMS malfunction indicator
illuminates, but if the Front Right, Rear Left, or Rear Right tire is under-inflated,
the low tire pressure telltales may illuminate together with the TPMS malfunction
indicator.
We recommend that the system be checked by an authorized Kia dealer to determine
the cause of the problem.
CAUTION
- The TPMS malfunction indicator may be illuminated if the vehicle is moving
around electric power supply cables or radios transmitter such as at police
stations, government and public offices, broadcasting stations, military installations,
airports, or transmitting towers, etc. This can interfere with normal operation
of the Tire Pressure Monitoring System (TPMS).
- The TPMS malfunction indicator may be illuminated if snow chains are
used or some separate electronic devices such as notebook computer, mobile charger,
remote starter or navigation etc., are used in the vehicle. This can interfere
with normal operation of the Tire Pressure Monitoring System (TPMS).
When the tire pressure monitoring system warning indicators are illuminated,
one or more of your tires is significantly under-inflated.
If the telltale illuminates, immediately reduce your speed, av ...
If you have a flat tire, the Low Tire Pressure telltale will come on. We recommend
that the system be checked by an authorized Kia dealer.
CAUTION
We recommend that you use the sealant approved by Ki ...
Other information:
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Clutch bolt remover
Removal and installation of clutch bolt
...
Specification
Item
Specification
Control type
N/H (Normal High)
Control pressure kpa (kgf/cm², psi)
500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)
50 ~ 850 ...