Kia Carens: What to do in an emergency / Road warning
Hazard warning flasher
.png)
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway.
Press the flasher switch with the ignition switch in any position. The flasher
switch is located in the center facia switch panel. All turn signal lights will
flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- The hazard warning flasher should always be on while the vehicle is being
towed.
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in
the N (Neutral) position and then push the vehicle to a safe place.
If your ...
Other information:
This indicator light illuminates:
• When the engine is being preheated with the ignition switch or Engine Start/Stop
Button in the ON position.
- The engine can be started after the glow indicator light goes off.
- The illumination time varies with the engine coolant temperature, air temperature ...
1.Press the speed limit button on
the steering wheel, to turn the system on.
The speed limit indicator light will illuminate.
2.Move the lever down (to SET-).
3.Move the lever up (to RES+) or down (to SET-), and release it at the desired
speed. Move the lever up (to RES+) or down (to SET-) and ...