Kia Carens: Cooling System / Reservoir Tank Repair procedures

Kia Carens RP (2013-2018) Service Manual / Engine Mechanical System / Cooling System / Reservoir Tank Repair procedures

Removal and Installation
1.
Disconnect the over flow hose (A).
2.
Remove the reservoir tank (B).
Tightening torque :
7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 Ib-ft)

3.
Install in the reverse order of removal.
Coolant Repair procedures
Replacement And Air Bleeding    Never remove the radiator cap when the engine is hot. Serious scalding could b ...

Cooling Fan Components and components location
Components 1. Cooling fan 2. Fan motor 3. Cooling fan shroud 4. Cooling fan resistor ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Injector Troubleshooting


Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from th ...

Kia Carens RP (2013-2018) Service Manual: 35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications


Specification Item Specification Control type N/H (Normal High) Control pressure kpa (kgf/cm², psi) "500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)" Current value (mA) ...

Copyright © www.kicaman.com 2015-2023