Kia Carens: Interior Trim / Rear Transverse Trim Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Transverse Trim Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the luggage box hole cap (A).
2.
After loosening the mounting nuts, then remove the luggage rear tray (B).

3.
Using a clip remover, detach the rear transverse trim mounting clips (A).
4.
Using a screwdriver or remover, remove the rear transverse trim (B).

5.
Install in the reverse order of removal.
  
Replace any damaged clips.
Rear Transverse Trim Components and components location
Component Location 1. Rear transverse trim ...

Luggage Side Trim Components and components location
Component Location 1. Luggage side trim ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Description and operation


Description Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill and the clutch is not operated and starts it again as soon as the clutch is operated. This not only reduces fuel consumption, it also lowers emissions.Idle Sto ...

Kia Carens RP (2013-2018) Owners Manual: Technical Data


System voltage: DC 12 V Working voltage: DC 10 - 15 V Amperage rating: max. 15 A Suitable for use at temperatures: -30 ~ +70°C (-22 ~ +158°F) Max. working pressure: 6 bar (87 psi) Size Compressor: 170 x 150 x 60 mm (6.7 x 5.9 x 2.4 in.) Sealant bottle: 85 x 77 ø mm (3.3 x 3.0 ø in.) Compressor w ...

Copyright © www.kicaman.com 2015-2025