Kia Carens: Engine start/stop button position / ON

Kia Carens RP (2013-2018) Owners Manual / Driving your vehicle / ENGINE START/STOP button / Engine start/stop button position / ON

With manual transaxle

Press the engine start/stop button when the button is in the ACC position without depressing the clutch pedal.

With automatic transaxle / Dual clutch transmission

Press the engine start/stop button while it is in the ACC position without depressing the brake pedal.

The warning lights can be checked before the engine is started. Do not leave the engine start/stop button in the ON position for a long time. The battery may discharge, because the engine is not running.

ACC(Accessory)

With manual transaxle Press the engine start/stop button when the button is in the OFF position without depressing the clutch pedal. With automatic transaxle / Dual clutch transmission Press the eng ...

START/RUN

With manual transaxle To start the engine, depress the clutch pedal and brake pedal, then press the engine start/stop button with the shift lever in the N (Neutral) position. With automatic transaxl ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Rain Sensor Repair procedures

Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...

Kia Carens RP (2013-2018) Owners Manual: Blind spot detection system (BSD)

The BSD (Blind spot detection) system uses a radar sensor to alert the driver while driving. It senses the rear side territory of the vehicle and provides information to the driver. ➀ BSD(Blind spot detection) Warning range is dependent on your vehicle speed. However, if the speed of your vehi ...