Kia Carens: Automatic Transaxle Control System / Line Pressure Control Solenoid Vale Specifications

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Vale Specifications

Specification

Item	Specification
Control type	N/H (Normal High)
Control pressure kpa (kgf/cm², psi)	500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)
Current value (mA)	50 ~ 850
Coil resistance(Ω)	5.1 ± 0.3

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Clea ...

Line Pressure Control Solenoid Vale Components and components location

Component Location 1. Line pressure control solenoid valve (LINE_VFS) ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Using the clutch

The clutch pedal should be depressed all the way to the floor before shifting, then released slowly. The clutch pedal should always be fully released while driving. Do not rest your foot on the clutch pedal while driving. This can cause unnecessary wear. Do not partially engage the clutch to hold ...

Kia Carens RP (2013-2018) Owners Manual: Driver's Attention

The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. - The vehicle drives on a curved road or through a tollgate. - The sensor is polluted with rain, snow, mud, etc. - The rear bumper, in which the sensor is locat ...