Kia Carens: Automatic Transaxle Control System / Input Speed Sensor Description and operation

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Description and operation

Description

•	Input speed sensor uses an electric current type hall sensor in which the current is changed by the magnetic variation.

•	Input speed sensor (A) and output speed sensor are integrated and installed in the transaxle.

Functions

•	Measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM.

•	The sensor provides critical input data used in feedback control, torque converter clutch control, gear setting control, line pressure control, clutch activation pressure control, and sensor fault analysis.

Transaxle Oil Temperature Sensor Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air clea ...

Input Speed Sensor Specifications

Specifications ▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.2 ~ 1. ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Cluster Ionizer (DATC only) Description and operation

Description The cluster ionizer makes disinfection and decomposition of bad smell from the air-conditioner or inflow air. And it cleans the inside air of a vehicle. When the ignition switch is ON, the ionizer runs "CLEAN" mode and then "ION" mode, swit ...

Kia Carens RP (2013-2018) Service Manual: Air Ventilation Seat Control Unit Repair procedures

Removal Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (A) after loosening the screws and disconnecting the connector. ...