Kia Carens: Front Seat / Front Seat Shield Inner Cover Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	After loosening the mounting screw, then remove the front seat shield inner cover (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Front Seat Shield Inner Cover Components and components location

Component Location 1. Front seat shield inner cover ...

Front Seat Back Cover Components and components location

Component Location 1. Front seat back cover ...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Wheel alignment and tire balance

The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tire wear or your vehicle pulling one way or the other, t ...

Kia Carens RP (2013-2018) Service Manual: Evaporator Temperature Sensor Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminal “+” and “-” of the evaporator temperature sensor. ...