Kia Carens: Front Door / Front Door Outside Handle Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Front Door / Front Door Outside Handle Repair procedures

Replacement
1.
Remove the hole plug (A).
2.
After loosening the mounting bolt, then remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.
Remove the front door outside handle (A) by sliding it rearward.

4.
Disconnect the front door outside handle connector (A).

5.
Install in the reverse order of removal.
  
Be sure to install the outside handle pad (A) onto between the outside handle and the door panel.

Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
Front Door Outside Handle Components and components location
Component Location 1. Front door outside handle ...

Front Door Latch Components and components location
Component Location 1. Front door latch ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Heated Oxygen Sensor (HO2S) Specifications


Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.4 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) Output Voltage(V) R ...

Kia Carens RP (2013-2018) Service Manual: Auto Light Sensor Repair procedures


Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply an ...

Copyright © www.kicaman.com 2015-2026