Kia Carens: Evaporative Emission Control System / Canister Repair procedures

Kia Carens RP (2013-2018) Service Manual / Emission Control System / Evaporative Emission Control System / Canister Repair procedures

Removal
1.
Lift the vehicle.
2.
Disconnect the vapor hose quick-connector (A) and ventilation hose (B).
3.
Remove the protector installation bolts (C) and then remove the canister.

Inspection
1.
Check for the following items visually.
- Cracks or leakage of the canister
- Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atmosphere
B: Canister ↔ Fuel Tank
C: Canister ↔ Intake Manifold
Installation
1.
Install in the reverse order of removal.
Canister installation bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Components and components location
Components Location 1. Purge Control Solenoid Valve (PCSV) 2. Vapor line 3. Canister ...

Fuel Filler Cap Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Other information:

Kia Carens RP (2013-2018) Service Manual: High Mounted Stop Lamp Repair procedures


Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to Body - "Rear Spoiler") 3. Remove the high mounted stop ...

Kia Carens RP (2013-2018) Service Manual: Injector Troubleshooting


Signal Waveform The three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from th ...

Copyright © www.kicaman.com 2015-2021