Kia Carens: Curtain air bag / Air bag inflation conditions

Kia Carens RP (2013-2018) Owners Manual / Safety features of your vehicle / Air bag - supplemental restraint system / Curtain air bag / Air bag inflation conditions

Front air bags

Front air bags are designed to inflate in a frontal collision depending on the intensity, speed or angles of impact of the front collision.

Side and curtain air bags

Side and/or curtain air bags are designed to inflate when an impact is detected by side collision sensors depending on the strength, speed or angles of impact resulting from a side impact collision.

Although the front air bags (driver’s and front passenger’s air bags) are designed to inflate only in frontal collisions, they also may inflate in other types of collisions if the front impact sensors detect a sufficient impact. Side air bags (side and/or curtain air bags) are designed to inflate only in side impact collisions, but they may inflate in other collisions if the side impact sensors detect a sufficient impact.

If the vehicle chassis is impacted by bumps or objects on unimproved roads or sidewalks, air bags may deploy. Drive carefully on unimproved roads or on surfaces not designed for vehicle traffic to prevent unintended air bag deployment.

Air bag non-inflation conditions

Air bag collision sensors
(1) SRS control module (2) Front impact sensor (3) Side impact sensor (4) Side impact sensor WARNING Do not hit or allow any objects to impact the locations where air bag or sensors are installed ...

SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely service by yourself. If the SRS air bag warning light does not illuminate, or continuously remains on, we recommend that ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Specifications


Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 22.0 ~ 26.0 [20°C(68°F)] Tightening Torques Item ...

Kia Carens RP (2013-2018) Service Manual: Climate Control Air Filter Repair procedures


Replacement 1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. Remove the filter cover (A) by pressing the knob. ...

Copyright © www.kicaman.com 2015-2019