Kia Carens: How the system works / 3. Search for parking space
.png)
- Slowly drive forward maintaining the distance of approximately 50cm ~ 150cm
(19.6in.~59.0in.) with the parked vehicles. The side sensors will search for
a parking space.
- If the vehicle speed is over 30km/h (18.6mph), a message will appear to
notify to reduce speed.
- If the vehicle speed is over 40km/h (24.8mph), the system will cancel.
✽ NOTICE
- Turn on the hazard warning flasher if it is crowded with other vehicles.
- If the parking lot is small, slowly drive more nearer to the parking
space.
- The search for a parking space will be completed only when there is enough
space for the vehicle to move to park.
✽ NOTICE
- When searching for a parking space, the system may not be able to find
a parking space if there is no vehicle parked, a parking space is available
after driving by or a parking space is available before driving by.
- The system may not operate normally in the following conditions:
(1) When the sensors are frozen
(2) When the sensors are dirty
(3) When it snows or rains heavily
(4) When a pillar or object is near
.png)
✽ NOTICE
Slowly drive forward maintaining the distance of approximately 50cm ~ 150cm
(19.6in.~59.0in.) with the parked vehicles. If not within the distance, the system
may not be able to search for a parking space.
CAUTION
After searching for a parking space is completed, continue using the system
after checking the surrounding area.
Select the parking assist mode by pressing the Smart Parking Assist System
button with the shift lever in N (Neutral) or D(Drive) and the brake pedal depressed.
The right side parallel mode is s ...
While driving forward to search for a parking space, the above message will appear
with a beep sound if the search is complete. Stop the vehicle and shift to the R
(Reverse) position.
CAUTION
Alw ...
Other information:
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
After loosening the mounting screws, then remove the rear door inside
handle (A).
3.
Dis ...
1. In-vehicle lamp, if necessary, after separation can be used as a portable.
2. Press the button (1).
3. Pull out the lamp holder.
4. Press the power switch (2).
❈ If the portable lamp does not turn on, it means the portable lamp needs to
be charged. Insert the lamp holder and then charge it ag ...