Kia Carens: Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Description and operation

Kia Carens RP (2013-2018) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Transaxle Oil Temperature Sensor Description and operation

Description
The sensor used is a thermistor (NTC) in which resistance changes with temperature variation.
The TCM supplies about 5 voltage to the sensor; the output value changes with ATF temperature.
Oil temperature sensor is installed on the valve body integrated with a solenoid valve harness.

Functions
Transaxle oil temperature sensor monitors the temperature of ATF and conveys the readings to TCM.
Data produced by this sensor is used to identify torque converter clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.
Transaxle Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the ...

Transaxle Oil Temperature Sensor Description and operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Front Door Latch Repair procedures


Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Remove the front door outside handle base (A) by pushing in the lock pins located in the back. ...

Kia Carens RP (2013-2018) Service Manual: Knock Sensor (KS) Repair procedures


Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake manifold") 3. Disconn ...

Copyright © www.kicaman.com 2015-2021