Kia Carens: Starting System / Starter Relay Repair procedures

Kia Carens RP (2013-2018) Service Manual / Engine Electrical System / Starting System / Starter Relay Repair procedures

Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).

4.
Check for continuity between the terminals (30 and 87) using an ohmmeter.
Terminal
Resistance
Measure
30 - 87
1MΩ or higher
If there is continuity between the terminals, replace the relay.

5.
Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
Terminal
Resistance
Measure
30 - 87
1Ω or less
If there is no continuity between the terminals, replace the relay.

6.
Install the starter relay.
7.
Install the fuse box cover.
Starter Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanic ...

Cruise Control System
...

Other information:

Kia Carens RP (2013-2018) Owners Manual: Starting the diesel engine


To start the diesel engine when the engine is cold, it has to be pre-heated before starting the engine and then have to be warmed up before starting to drive. 1.Make sure the parking brake is applied. 2.Manual Transaxle - Depress the clutch pedal fully and shift the transaxle into Neutral. Keep th ...

Kia Carens RP (2013-2018) Service Manual: Front Impact Sensor (FIS) Repair procedures


Removal    • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disco ...

Copyright © www.kicaman.com 2015-2026