Kia Carens: Front Bumper / Radiator Grill Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill Repair procedures

Replacement
  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
After loosening the mounting screws, then remove the radiator upper cover (A).

3.
Loosen the radiator grill mounting screws.
4.
Unlock the lock pins (B) by pushing it up with a screwdriver or remover and then remove the radiator grill (A).

5.
Install in the reverse order of removal.
  
Replace any damaged clips.
Radiator Grill Components and components location
Component Location 1. Radiator grill ...

Rear Bumper
...

Other information:

Kia Carens RP (2013-2018) Service Manual: Cylinder Head Components and components location


Components 1. Cylinder head assembly 2. MLA 3. Retainer lock 4. Retainer 5. Valve stem seal 6. Valve spring 7. Valve spring seat 8. OCV (Oil Control Valve) 9. Exhaust valve 10. Intake valve 11. Cylinder head gasket ...

Kia Carens RP (2013-2018) Owners Manual: Parking brake - Hand type


Applying the parking brake To engage the parking brake, first apply the foot brake and then without pressing the release button in, pull the parking brake lever up as far as possible. In addition it is recommended that when parking the vehicle on a gradient, the shift lever should be positioned ...

Copyright © www.kicaman.com 2015-2025