Kia Carens: Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Kia Carens RP (2013-2018) Service Manual / Engine Control / Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Description
Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature.
To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermister and it's resistance changes in reverse proportion to the temperature.

Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. ...

Intake Air Temperature Sensor (IATS) Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 ~ 48.35 ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Rear Wiper Motor Repair procedures


Inspection Rear Wiper Motor 1. Remove the connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively. 3. Check that the motor op ...

Kia Carens RP (2013-2018) Service Manual: Climate Control Air Filter Repair procedures


Replacement 1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). 3. Remove the filter cover (A) by pressing the knob. ...

Copyright © www.kicaman.com 2015-2021