Kia Carens: Blower / Intake Actuator Description and operation
The intake actuator is located at the blower unit. It regulates the intake door
by a signal from the control unit. Pressing the intake selection switch will
shift between recirculation and fresh air modes.
Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that t ...
Other information:
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
3.
Afte ...
Components
1. Intake
Seal
2. Intake Joint Duct
3. Case To Case Clip
4. Intake Upper Case
5. Antinoise Pad
6. Intake Actuator Motor Assembly
7. Intake Door Assembly
8. Intake Lower Case
9. Blower Upper Case
10. Air Filter
11 ...