Kia Carens: Crash Pad / Cluster Fascia Panel Repair procedures

Kia Carens RP (2013-2018) Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the center fascia panel. (Refer to Crash Pad - "Center Fascia Panel")

2.	Lower the steering wheel.

3.	After loosening the mounting screws, then remove the cluster fascia panel (A).

Install in the reverse order of removal.

•	Replace any damaged clips.

Cluster Fascia Panel Components and components location

Component Location 1. Cluster fascia panel ...

Center Fascia Panel Components and components location

Component Location 1. Center fascia panel ...

Other information:

Kia Carens RP (2013-2018) Service Manual: Auto Light Sensor Repair procedures

Inspection In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor's input. If IGN1 ON, The BCM monitors the range of this supply an ...

Kia Carens RP (2013-2018) Service Manual: Rear Door Belt Inside Weatherstrip Repair procedures

Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. Install in the reverse order of removal ...